Riding LeeTran With Your Bicycle

  • As the bus approaches, have your bike ready to load; remove any items that could fall off (bike pump, water bottle, etc.)
  • Always approach the bus from the curb side.
  • Tell the bus driver that you are loading a bike.
  • For safety reasons, the driver cannot get off the bus to assist you. Please use the instructions found on this website
  • Bike racks are first come, first served. Each bus can carry either two or three bikes. The front wheel of the bike closest to the bus should face curbside. The front wheel of the second bicycle must face in the opposite direction.
  • There is no additional fare for using the bike rack.
  • Children 10 and younger must be accompanied by an adult to load and unload bikes.
  • All people using the rack must be strong enough to load and unload their bikes.
  • We cannot carry bicycles with child seats, large carriers or baskets, or any other attachment that will interfere with the driver's visibility.

TO LOAD -

  1. Squeeze handle and pull down to release folded bike rack.
  2. Lift bike onto the rack, putting the front and rear wheels in the marked slots. Please load the rack nearest the bus first. The front wheel of the bike closest to the bus should face curbside. The front wheel of the second bicycle must face in the opposite direction.You can load/unload the rack nearest the bus without unloading the bike in front.
  3. Raise the support arm, as far up on the wheel as you can, making sure it is resting on your front tire, not on the fender or frame.

    4.  

UNLOAD –

  1. Tell the driver you need to unload your bike.
  2. Move the support arm down and lift out your bike.
  3. Please fold up the rack if it is empty.

 

EEO/AA Policy